MONIPA Automatic Tile Leveling Machine for Wall Floor Tiles Handheld Vibrator Tiler Tile Vibrator Parameters: Power: 600W Input: 110V / 60HZ Output: 10.8V-12.8V Battery capacity: 2500mAh Lithium battery capacitor: 12VF Charging time: 1-2H Working time: ＞ 8H Vibration frequency: 0-150Hz / s Adsorption strength: 40Kg Suction cup diameter: 12cm / 4.7 " Applicable tile: 100x100cm Explanation: 1. Please check the battery before use to make sure the battery is fully charged; 2. Turn the inverter switch to the left to the minimum, and then start the machine as needed to adjust to a suitable state; 3. Place the machine on the tile to be laid, hold the suction cup, and then grasp the tile. Press the switch to start working and immediately flatten the protruding part of the tile. 4. When working, be sure to hold the suction cup to work on the tile, do not let the machine idle, and do not keep pressing the switch during the paste process, the rhythm is more conducive to paving. Charging instructions: 1. After receiving the machine, press the switch to adjust whether the frequency switch works. If the light on the machine is off, please charge it before using it normally. When the charger is connected and charged, the charge indicator on the charger will light. 2. This product usually needs to be charged for 3-4 hours. It will stop automatically when fully charged, and the indicator light is green or off. 3. After fully charged, it can work for more than 8 hours, but in order not to affect the service life of this product, please charge it every day during normal use. 4. When using this product normally, you need to charge it once a day, such as not charging once a month. Package Included: 1 x tiler 2 x battery 1 x charger 1 x storage bag