Tile Leveling System Set Our tile levelers are great tools for floor and wall setting, easy to use in DIY operation, it keeps the tile balance on the same horizontal position and prevents tiles from moving while curing.Very suitable for floor/wall setting, which is the most economical tile leveling system available. Try our tile leveling system can help you level your tiles perfectly so that you can end up with a brilliantly tiled floor or wall. Reusable Wedges Each spacer needs 1pcs wedges to firmly holds the tile in space. The wedge allows for a 1/16" minimum grout joint, and it firmly holds the tile in place, This is the most economical tile leveling system available . Premium Tile Spacer Clips We use more crispy high-quality raw PE injection moulding tile spacers 1/8 inch or 1/16 inch (one-time), the cut is obvious, thinner and easier to kick off. Avoid the trouble of cleaning caused by incomplete disassembly (warm reminder: Do not push so hard during use tile 3mm(1/8") Tile Spacer Clips : Suitable for 1/8" (3 mm)up to 1/2"(12mm) thick tiles ，tile gap > 3mm (1/8") 1.5mm(1/16") Tile Spacer Clips : Suitable for 1/8" (3 mm)up to 1/2"(12mm) thick tiles ，tile gap > 1.5mm (1/16") Labor-Saving Tile Plier and Practical Rubber Hammer Tile plier coated with soft PP material, non-slip, make full use of the lever, can help you quickly clamp the tile leveling wedges and tile clips effortlessly. Rubber Hammer made of natural white rubber, odorless and healthy, and is a great tool for leveling floor tiles. Tile leveling system makes the tiles flatter and saves time. Steps Introduction Place the base under the tileKnock with a hammer or level rulerPush with a push pliersOne tile with four sets of wedgesKnock off with rubber hammer or just kick off after 24 hoursThe base is disposable and the wedge can be reused Product Advantages Improve the flatness of tiles after they are laidMake the tile gap uniformImprove construction efficiency and prevent tile movementReduce the difficulty of construction, so that novices can also be leveled Warm Tips Before putting the tiles, remember to erase some of the cement on the edge of tile. Do not fill up the tiles with cement. This will prevent the cement from being wrapped in the clamps after the clips are placed. The solidification will affect the removal of the clips.Please adjust the pliers' screws to determine the pushing distance before you push the wedges. It is ensure that each wedge is pushed at the same distance, then it will be same level of tile.